Network labs Docs Open simulator →

Your first VyOS router — op-mode reads

A single VyOS router. Three op-mode shows: version, interfaces in the Cisco-shaped brief view, and the IPv4 routing table.

Open this lab in your browser →

Free · no install · no account

Scenario

VyOS is a Linux-based router OS (forked from Vyatta Core) with a two-phase configuration model: - Operational shell — what you land in. Run show ..., ping, traceroute. Prompt is vyos@hostname:~$. - Configuration shell — entered with configure. Stage changes with set ... / delete ..., then commit to apply, save to persist, exit to leave. This lab stays in op-mode. Configuration is a later lab. Most op-mode show commands are deliberately Cisco-shaped (show ip interface brief, show ip route) — VyOS targets operators fluent in Cisco syntax. The router vyos-r1 is pre-loaded with one Ethernet port eth0 carrying 10.0.0.1/24.

Topology

1 × router · VyOS

What you will do

  1. Type show version to see the box's identity banner.

  2. Run show ip interface brief. The output shape is identical to Cisco's — VyOS aliases the command verbatim.

  3. Run show ip route. The legend (L = local, C = connected, S = static) is Cisco-shaped.

Open this lab in your browser →

More labs on this topic

This lab in other languages

Dein erster VyOS-Router — Op-Mode-ReadsTu primer router VyOS — lecturas en modo operativoSeu primeiro roteador VyOS — leituras em modo operacionalTon premier routeur VyOS — lectures en mode opérationnelआपका पहला VyOS router — op-mode reads你的第一台 VyOS 路由器 —— 操作模式下的查看Il tuo primo router VyOS — letture op-mode初めての VyOS ルーター — op-mode での読み取り당신의 첫 VyOS 라우터 — op-mode 읽기Твой первый роутер VyOS — чтение в op-modeİlk VyOS yönlendiricin — op-mode okumalarıRouter VyOS đầu tiên của bạn — đọc ở op-mode