Junos ping and traceroute
- Fundamentals
- Beginner
- 5 min
- 2 steps
- Junos-style
Two Junos routers on a /30 link. Send packets across the link with ping and traceroute — both op-mode commands.
Open this lab in your browser →
Free · no install · no account
Scenario
Junos's connectivity tools are the same shape as Cisco's: ping <ip> and traceroute <ip>, both op-mode. No enable, no vendor-specific flags for the basic case. jnx1 (ge-0/0/0 = 10.0.0.1/30) and jnx2 (ge-0/0/0 = 10.0.0.2/30) are pre-cabled.
Topology
2 × router · Junos-style
jnx1— routerjnx2— router
What you will do
From
jnx1, pingjnx2at10.0.0.2.Traceroute to
jnx2fromjnx1.
Open this lab in your browser →
More labs on this topic
- Break and fix — your first troubleshooting walkBeginner · 10 min
- Config mode — your first configuration changesBeginner · 10 min
- EXOS break and fix — port disabledBeginner · 8 min
- EXOS config — create a VLAN, add a port, give it an IPBeginner · 10 min
- Your first ExtremeXOS switch — VLAN-centric readsBeginner · 8 min
- EXOS ping and tracerouteBeginner · 5 min
This lab in other languages
Junos ping und tracerouteJunos ping y tracerouteJunos ping e tracerouteJunos ping et tracerouteJunos ping और tracerouteJunos ping 与 tracerouteJunos ping e tracerouteJunos ping と tracerouteJunos ping과 tracerouteJunos ping и tracerouteJunos ping ve tracerouteJunos ping và traceroute