QoS + WLAN scheduling + iPSK + fast-roaming + HA SSO
- Services & wireless
- Advanced
- 14 min
- 4 steps
- Cisco IOS-XE-style
Five more 300-430 ENWLSI surfaces, all config + show. QoS profile (Slice Z1): Cisco's platinum|gold|silver|bronze tiers on the policy profile. WLAN schedule (Slice Z2): time-of-day broadcast window — weekdays + start/end minute. Identity PSK (Slice Z3): per-MAC PSK + VLAN overrides for a single PSK SSID. Fast-roaming (Slice Z4): 802.11r Fast Transition mode + Opportunistic Key Caching + 802.11k neighbor-list. HA SSO (Slice Z5): primary/secondary WLC redundancy pair config.
Open this lab in your browser →
Free · no install · no account
Scenario
Five more "config + show" surfaces. Together they close out the cheap remaining ENWLSI blueprint domains. Real Cisco WLCs map each WLAN onto one of four QoS tiers via the policy profile: platinum (voice), gold (video), silver (best-effort default), bronze (background). The simulator stores the tier as a string; DSCP/CoS marking on the wire is forward work. Operators commonly disable guest SSIDs outside business hours. wlanConfig.schedule carries weekdays (0=Sunday..6=Saturday) plus startMin / endMin (minutes since midnight). Empty weekdays means always-on. show wireless wlan schedule reports the catalog. iPSK lets a single WPA2-PSK SSID hand out different keys to different clients (matched by MAC), and optionally place each client in a different VLAN. The classic "BYOD with one SSID, per-device key, per-device VLAN" pattern. show wireless identity-psk reports the catalog with masked PSKs (last 4 chars only, mirroring real Cisco). Three roaming optimizations on the policy profile: - fastTransition: 802.11r — disabled | adaptive | enabled. adaptive advertises FT but still admits legacy clients. - okc: Opportunistic Key Caching — pre-802.11r roaming optimization where APs share the cached PMK. - neighborList: 802.11k neighbor-list advertisement — clients receive a list of nearby APs to scan first. All three surface in show wireless profile policy detail. Two WLCs in a stateful-switchover pair share client + AP state. On primary failure the secondary takes over without re-association. device.wireless.haPair: { peerIp, role: primary|secondary, priority } carries the config; show redundancy summary reports it. Datapath state sync is forward work.
Topology
1 × wireless controller · Cisco IOS-XE-style
WLC1— wireless controller
What you will do
On WLC1, run
show wireless profile policy detail VOICE-POL. Should report platinum QoS + 11r enabled + OKC + neighbor-list.Run
show wireless wlan schedule. corp-wifi broadcasts Mo-Fr 08:00-18:00; lobby-wifi is always-on.Run
show wireless identity-psk. Two MAC overrides — one with VLAN 50, one with WLAN-default VLAN.Run
show redundancy summary. SSO mode, primary role, peer 10.0.0.11.
Open this lab in your browser →
More labs on this topic
- Configure a DHCP serverBeginner · 12 min
- WLAN — broadcast a basic SSIDBeginner · 10 min
- HSRP: configure first-hop redundancyIntermediate · 12 min
- NAT: PAT (overload) for an inside LANIntermediate · 14 min
- HSRP — interface tracking with priority decrementIntermediate · 12 min
- VRF-Lite — two customers on one routerIntermediate · 12 min
This lab in other languages
QoS + WLAN-Planung + iPSK + Fast-Roaming + HA SSOQoS + programación WLAN + iPSK + roaming rápido + HA SSOQoS + agendamento WLAN + iPSK + roaming rápido + HA SSOQoS + planification WLAN + iPSK + itinérance rapide + HA SSOक्यूओएस + डब्लूएलएएन शेड्यूलिंग + आईपीएसके + फास्ट-रोमिंग + एचए एसएसओQoS+WLAN调度+iPSK+快速漫游+HA SSOQoS + pianificazione WLAN + iPSK + roaming veloce + HA SSOQoS + WLAN スケジューリング + iPSK + 高速ローミング + HA SSOQoS + WLAN 스케줄링 + iPSK + 고속 로밍 + HA SSOQoS + планирование WLAN + iPSK + быстрый роуминг + HA SSOQoS + WLAN planlama + iPSK + hızlı dolaşım + HA SSOQoS + Lập lịch WLAN + iPSK + chuyển vùng nhanh + HA SSO