Network labs Docs Open simulator →

WLAN — broadcast a basic SSID

Configure a wireless LAN profile on the controller WLC1: SSID corp-wifi, WPA2 pre-shared key, and bring it up. After the lab runs, the WLAN entry exists in the controller's catalogue, has a PSK set, and is enabled.

Open this lab in your browser →

Free · no install · no account

Scenario

A wireless controller carries a *catalogue* of WLAN profiles. Each entry has three things you cannot avoid: a profile name (controller-internal, e.g. corp-wifi), a numeric id (1..512, used in tags), and an over-the-air SSID (the name a phone sees in its Wi-Fi list). A new profile is born shut down — until you flip it on, the radios will not advertise the SSID. Default security is WPA2 with a pre-shared key; you supply the key with security wpa psk ascii STRING. The grammar: `` wlan <name> <id> <ssid> security wpa psk ascii <pre-shared-key> no shutdown ` The first line both creates the entry (if missing) and enters its sub-mode. The sub-mode prompt is (config-wlan)#. exit` returns to global config. NetVerdict note: this lab uses the IOS-XE-shape grammar that the controller vendor adopted for industry-standard SSID provisioning. Other wireless vendors (Aruba, Mist, Extreme) accept different keywords for the same concept; the cross-vendor wireless intent IR translates between them.

Topology

1 × wireless controller · Cisco IOS-XE-style

What you will do

  1. On WLC1, create WLAN profile corp-wifi, id 5, broadcasting SSID corp-wifi.

  2. Set the pre-shared key to s3cret-passphrase! and enable the profile.

Open this lab in your browser →

More labs on this topic

This lab in other languages

WLAN – sendet eine Basis-SSIDWLAN: transmite un SSID básicoWLAN — transmite um SSID básicoWLAN – diffuser un SSID de baseWLAN - एक बुनियादी SSID प्रसारित करेंWLAN — 广播基本 SSIDWLAN: trasmette un SSID di baseWLAN — 基本的な SSID をブロードキャストするWLAN — 기본 SSID 브로드캐스트WLAN — трансляция базового SSIDWLAN — temel bir SSID yayınlayınWLAN - phát SSID cơ bản